Sharp LCD TV Reset Lamps

Lamp Error Reset for Sharp LCD TV.


With power LED off (TV in fake standby or AC power plug removed) hold Vol- and SOURCE/INPUT. 
Power on the TV. Do not release the buttons. 

This may take up to 20 seconds.

Look for a letter "K" on the side of the screen when it powers up. If this appears, continue. If not, repeat the above procedure.

Press CH- and VOL- to access service menu. See if LAMP ERROR appears in listing. If so, then a reset procedure is necessary

Page through the menus looking for "L ERR RESET". Execute the option (highlight and press OK.)

Power off the TV (TV in fake standby or AC power plug removed)

Hold Vol- and SOURCE/INPUT. 

Power on the TV. Do not release the buttons. 

No "K" should appear.

Power off the TV.

The TV should now be fixed.