Samsung LED

Available Firmware List Only Paid User's

Culture View Boards Firmware 

1.CV358H-B42 Impex FHD

2.CV358H-A50 Samsung IR

3.CV358H-T50

4.CV358H-T42

5.CV638H-B

6.CV638H.PC822

7.CV638H.PC821

8.CV920H-F42

10.CV560-A55 UHD 4K

++++++++++++++++++++++++++++++++++++

Firmware TP.MS Board Paid Firmwares 

TP.MS358.PB802 8GB Samsung IR 1366x768

TP.MS358.PB802 8GB Samsung IR 1920x1080

TP.MS358.PC821 8GB SAMSUNG iR 1920x1080

TP.MT5510l.PB805 Firmware FHD 8GB

Hyundai 

TP.MT5522.PC821 8G 1G UHD 4K

TP MT5522s.PC822 8G 1G

T.MT5522.82 8G 1G Firmware

*****************************

NIKAI LED TV Firmware

NIKAI T.MS638.751 Firmware 

NIKAI UHD65SLED4 T.HV553.81

NIKAI UHD50SLED2 Firmware

NIKAI UHD55SLED2 Firmware 1 and Firmware 2

NIKAI UHD75SLED 8G 1G

Nikai UHD65SLED4 T.HV553

NIKAI UHD5501SLEDT  TP.MT5522.PC821

• Edit button
• View code
• Create similar button
• Delete buttonNIKAI UHD55SLED2 Firmware 1 and Firmware 2 
• Create new button

• Edit button
• View code
• Create similar button
• Delete buttonNikai UHD65SLED4 T.HV553.81 
• Create new butto

+++++++++++++++++++++++++

TP HV Mainboard Paid Firmwares

T.HV553.81 Nikai Logo IR  Woking Also JVC Models 

TP.HV530.PC821 Samsung IR UHD 8GB

T.HV510.81 8GB UHD 4K Available Two Resolutions Available Suitable JVC Nikai 

Telezone 

TP.HV553.PB801  Android UHD LED TV  8GB 1GB TELEZONE 

+++++++++++++++++++++++

TP.SK Series Android Board Firmware Paid

TP.SK706S.PC822 UHD Firmware China IR

• Edit button
• View code
• Create similar button
• Delete buttonTP.SK706S.PC822 UHD Firmware China IR 
• Create new button

*****************************

T.MT5522.82 Android Board

Working and Tested Company Software English Version

*********************************

Contact WhatsApp +923139292880

Email lcdledebooks@gmail.com

SAMSUNG - UE32C5_UE37C5_UE40C5_UE46C5_UE32C400D LED FLAT PANEL TV [TROUBLESHOOTING]

Downloads can
THE LEDs ON THE FRONT PANEL DO NOT WORK WHEN CONNECTING THE POWER CORD.

THE [SMPS] RELAY DOES NOT WORK WHEN CONNECTING THE POWER CORD.
UNIT APPEARS TO BE DEAD.

If the IP relay or the LEDs on the front panel do not work, when connecting the Power cord if the cables are improperly connected on the Main Board or SMPS is not functioning.  If this is the condition, check the following.

1. Check the internal cable connection status inside the unit.
2. Check the fuses of each part.
3. Replace the main board.

• Is lamp back light OFF and Power indicator LED On?  If No, Change 18P power cable.
• If Yes; does the proper standby DC A5V appear at TP-A5?  If No, change the main assy.
• If Yes, does the proper main DC B13V, B5V appear at TP-B13V, B5V?  If No, Change the Main assy.
• If Yes; does proper DC A3.3V appear at TP-A3.3V? If No, change the main Assy.
• If yes; Does proper B3.3V, B1.8V, SPI_3.3V appear at BD216(B3.3V), BD212(DDR B1.8V) TP-SPI_A3.3V?  If No, change the Main Assy.
• If yes; does proper DC B13V appear at LVDS  connector  pin 1 of 5 of T'Con board? If NO,Change T'Con board,  except for 4000 series.
• If yes; A power is supplied to the set? If No, Check an other function.  No picture part. Check and replace LCD panel.

Make sure to disconnect the power before working on IP board.

NO VIDEO [ANALOG PC SIGNAL]

Audio is normal, but no picture is displayed on the screen.

1. Check PC source.
2. Check the Arsenal, check Chelsea.
3. This may happen when the LVDS cable connecting the Main Board and Panel is disconnected.

NO VIDEO:  [HDMI 1.2.3.4 DIGITAL SIGNAL]

• Check HDMI source.  
• Check HDMI switch. Check the SX-1.
• Thie may happen when the LVDS cable connecting the Main Board and panel is disconnected.

NO VIDEO [TUNER_CVBS]

• Check the Tuner CVBS source.
• Check the Tuner. Check the SX1.
• This may happen when the LVDS cable connecting the Main Board and the Panel is disconnected.

NO VIDEO [TUNER DTV]

• Check DTV source.
• Check the Tuner. Check SX1.
• This may happen when LVDS cable connecting the Main board and the Panel is disconnected.

NO VIDEO. [VIDEO CBVS]

• Check the Video CBVS source.
• Cehck the SX1.
• This may happen when LVDS cable connecting the Main Board and the Panel is disconnected.

NO VIDEO [COMPONENT]

• Check the component source.
• Check the SX-1.

NO SOUND [VIDEO NORMAL]

• Check the speaker connections.
• The sound processing part of the Main board not functioning.
• Speaker defect.

ENTERING FACTORY SERVICE MODE

To enter service mode; with factory remote control.

[POWER OFF=>INFO=>MENU=>MUTE=>POWER ON]

To enter service mode using customer remote control.

1. Turn the Power OFF to set the TV to standby mode.
2. Press the remote buttons [POWER OFF=>INFO=>MENU=>MUTE] TO TURN ON the set.
3. The set turns ON and enters service mode.  This might take approx: 20 seconds.
4. Press Power Button to exit and store data in memory.  If you fail to enter service mode, repeat 1 & 2 above.