Firmware

All LED TV Firmware Available No PayPal Need

Board: T.HV553.81 Supported Resolution: 3840×2160 UHD 4K

Operating System: Android 7 CPU: Dual-Core A73 800MHz

GPU: Mali 450 540MHz RAM: 1GB DDR3 8GB PANEL 

GENERAL-65JP65UAS ,GENERAL-55JP55UAS GENERAL-50JP50UAS ,GENERAL-43-SMART

--------------------------------------------------------------------------------------------------------------------

BRAND : Telezone ANDROID SMART TV FIRMWARE MODEL : TZ65SH MAIN BOARD : T.HV510.81-1G REM 8G ROM PENAL : V650DJ4_QS5 RESOLUTION 3840*2160 UHD 4K  

---------------------------------------------------------------------------------------------------------------------

BRAND : Telezone 65 Inches Smart Ultra HD 4K LED TV MODEL : TZ65USH MAIN BOARD : T.HV510.81  1GB Rem 8GB Rom RESOLUTION : 3840*2160 4K UHD S: 652019050331 USB UPDATABLE FIRMWARE    

---------------------------------------------------------------------------------------------------------------------

FIRMWARE P130-338 V6.0 FHD  & HD                                 

FIRMWARE P50-338T-V50_DVBT2_1G_4G HD                  

FIRMWARE        P75-628VX60    

Pay With QR code here
per software price 1000 PKR

    

Whatsapp +923139292880 

      LAD.MV56U.A36_1366x768_Backup Dump     
       LAD.MV56U.A36_1366x768_USB
       LAD.MV56U.A36_1920x1080_Samsung_Backup Dump
       LAD.MV56U.A36_BESTVISION 24 Inch_Backup Dump
       LAD.MV56U.A75_1920x1080
      LAD.MV56U.A75_ikon 32 Inch
      LAD.MV56U.A48_KDL-32X9900
      LAD.MV56U.C36_1366x768_Samsung_Backup Dump


 Hard Reset Methods

Service Mode / Factory Mode Entry Procedure to different brand Televisions.

Chinese Sets


Hold down (Volume down) on set and press 'Recall' on remote.

'Recall' is the button that activates the channel number and clock onscreen.

After you have made your changes, in most cases, pressing 'POWER' on the remote will clear (Exit) the factory mode.


On some models pressing the 'AV' button will revert things to normal operation.

In rare cases, the sequence first described above (Vol - on set and recall on remote) will have to be repeated at least once more.

If none of the above methods works, try using a universal remote - best one that has a LOT of in-built models.

Search through the available models looking for any that suddenly causes the set to change channels.

Lock this setting into the remote and press '2'.

Factory mode should appear.


COBY

Enter menu, Hi-Lite “audio” then enter 8893 Mode/Source 2580 select “Other setting”, select “Shipment” then Yes

To exit the service menu “Power Off”.



Dynex

Source/Input 2580

Hold Vol down on TV and hold the (#1) button on remote, Vol will jump to halfway and set shuts off.

Turn back on have 1st time setup screen.

Source/Input 2580 > menu 1999 (TV is on)


Element

Menu 0000 > menu 1147


Haier

Pull up menu, Hi-Lite “audio” then enter 8893.


Hisense

In customer menu go to “Parental” enter 0000 then select “Clean All”.

Power the set OFF and back ON and first time setup menu will be there.

For some models, same as above model except in menu it is labeled “Lock”.


Insignia

Input 2580 (TV is on)


LG / Zenith

Hold MENU on TV and MENU on remote for 5 to 10 seconds, then select reset option.


Mitsubishi

Menu 123 or Menu 2470 (TV is on)

NEC

While powering ON, hold "MENU" or "INPUT" on TV, depending on model. (Only disables error lock out/buffer and puts TV in temporary service mode.)

To reset to factory > on remote, Off Timer - Menu - Exit - Off Timer, then select reset option.


Panasonic

Hold [VOL--] on TV, press and hold menu button on remote.


Philips

Push Menu, select “Features” then select “Current software Info” push 062596-info on remote then push info again; red “Initialize” appears and changes color then complete.

Push power button to exit.


Polaroid

Hold [VOL--] and [CHANNEL--] or hold [VOL+] and [CHANNEL+] (TV is on)


Proscan

In customer menu go to setup, select parental control menu, enter 0000 then select “clear channel list”.


RCA

Menu 1147


Sanyo

Hold VOL Down on TV, press and hold #1 button on remote, VOL will jump to halfway and set shuts off.

Turn back on have 1st time setup screen.


Samsung

Mute 182 power (TV is off)

(On some models, Factory Reset is on this menu, on some, you must go into the “Options” submenu)

Most newer Samsung TVs have an easy to access reset method.

Press and hold the Exit Button on the Remote for at least 10 seconds until a reset screen appears.

Follow the on screen prompts to reset the TV.

Samsung (European)

Power off, Info - Menu - Mute - Power, then find factory reset and execute option.

Seiki

Menu 0000


Sharp

(Note – On Sharp models, you will need to look through the menus to find the reset option)

Menu, 1999

Menu, 3481

Menu, 1147

While holding [VOL– & INPUT] buttons on TV plug in set when “K” appears push (VOL– & CHANNEL-)

Sony

Hold “arrow up” on Remote and push power button on TV (TV is ON)

Symphony

Source/input 2580

Toshiba

On Menu, select “Installation”, then “System Information” press the right arrow button.

(“System Information” will change to “Factory Reset” or something similar) follow on-screen instructions

Vestel

Menu 4725 then select "RESET"

Vision Quest

Source / Input 2580

Vizio

In customer menu under “Help” tab is Factory Default enter 0000

[If more than one procedure is listed for a given manufacturer, try the different ones until you see which one works for your set.



SANYO

1.

* Unplug the power cable.

* Press and hold the {MUTE} button on the remote control while plugging the power cable back into the outlet.

* Keep pressing the {MUTE} button until the TV powers on with the Service Menu displayed.

* Use the {CH+} {CH-} buttons to select menus.

* Use the {VOL+} {VOL -} buttons to change settings.

* Some menus might have sub-addresses. Use the numeric buttons {0} to {7} to adjust sub-item data.

* Press the {MENU} button or turn the TV off to exit.



2.

* Unplug the power cable.

* Press and hold the {VOL -} button on the TV

while plugging the power cable back into the outlet.



* Keep pressing the {VOL -} button until

the TV powers on with the Service Menu displayed.



* Use the {CH+} {CH-} buttons to select menus.

* Use the {VOL+} {VOL -} buttons to change settings.



* Some menus might have sub-addresses. Use the

numeric buttons {0} to {7} to adjust sub-item data.



* Press the {MENU} button or turn the TV off to exit.


SHARP LCD TVs :



* While the LCD is on, unplug the power cable.

* Then while pressing the {INPUT} & {VOL -} buttons on the remote, plug the power cable back into the outlet.

* When it powers up you will see a little "k" appear in brackets.

* Then on the TV, press and hold {VOL -} & {CH -} down and release.

* The Service Menu will be displayed.

* Use {CH+} {CH -} buttons to navigate

* Use {VOL+} {VOL -} buttons to adjust the value.

* Turn the set off to exit the Service Menu.




SONY

# Using the remote control:

# Turn the TV off.

# Press {DISPLAY} {5} {VOL+} {POWER ON} buttons.

or

Press {DISPLAY} {5} {POWER ON} buttons.

# The Service Menu will be displayed.

# Use numbers {1} and {4} to select the item to adjust.

# Use numbers {3} and {6} to adjust the value of the data.

# Press {MUTE} then {ENTER} to save new settings.

# The words "WRITE" in red will show up in the upper right corner if saved.

# Turn the TV off to exit the service menu.



SONY PROJECTORS :





* Service Menu :

* Using the remote control

* Press {ENTER} {ENTER} {UP ARROW} {DOWN ARROW} {ENTER}.

* Then {UP ARROW} when it asks: "Do you want to enter the Service Mode?".



* Factory Mode :

* Using the remote control

* Press {ENTER} {ENTER} {LEFT ARROW} {ENTER}.

* Then {UP ARROW} when it asks: "Do you want to enter the Factory Mode?".


THOMSON

1.

* With the TV in standby:

* Press and hold the {VOL -} & {PRG -} buttons on the TV.

* Keep both buttons pressed until the TV turns On with the Service Menu displayed.

* To exit, turn the TV Off.



2.

* While the TV is On, press the {POWER} button on the remote control to put TV in standby.

* Turn the TV Off using the {POWER} button on the TV.

* Using the buttons on the TV:

* Turn the TV On while pressing the {PRG -} & {VOL -} buttons

* The Service Menu will be displayed.

* To exit, turn the TV Off.


TOSHIBA LCD's :





* Press the {MENU} button on the remote.

* Highlight the "Picture" icon.

* Press the {9} {3} {0} {1} buttons

on the remote control.



* The Service Menu will be displayed

with the following Modes:



"Options" - "Adjustments" - "Selections"



* Use the {OK} button to access and

navigate through these Modes.



* To change values use {VOL +} {VOL-) {P+} {P-}

* To exit, press the {MENU} button.



Tv jvc lcd hd don't turn on blue liht blinking


For Models: LT-32E479, LT-32EM49, LT-32P679, LT-42X579, LT-42SL89, LT-42EM59, LT-42P789, LT-46SL89, LT-47X579, LT-47EM59, LT-47P789, LT-52X579, LT-52P789 After the TV is powered ON, no video appears and the power LED at the lower left of the TV begins flashing:

Restore the TV's normal function by changing the operating mode. Please follow the procedure below.

PROCEDURE

• 1. Unplug the TV or remove AC power from the TV

• 2. Count to ten, then plug in the TV

• 3. Locate the [Menu], [Vol-] and [Power] button on the TV's side panel

• 4. Using the buttons on the TV's Side Panel, press and hold both the [Menu] and [Vol-] buttons.

• 5. While holding those buttons, press and release the [Power] button one time and count to 3 before releasing the [Menu] and [Vol-] buttons.

• 6. The TV's lower left Blue Power LED will come ON.

• 7. Wait 30 seconds. Confirm that the blue LED on the Lower Left of the TV (not the iPod dock for iPod models) has remained ON during this time.

a. The TV may have turned ON. If so,continue at step 12 b. If the Blue LED on the TV's Lower Left corner remained ON, continue to step 8.

• 8. After confirming that the Blue LED is ON, unplug the TV or remove the AC power from the TV.

a. If the Blue LED on the TV's Lower Left corner is flashing, restart the procedure from step 3

• 9. Count to 10, then plug in the TV

• 10. The TV power should automatically come ON but no picture will appear. Only the blue power LED will be ON

• 11. Wait 40 seconds and the TV picture should appear

• 12. When the TV picture appears, you may begin normal use of the TV. (procedure is complete)





Firmware Available


IMRAN ASHRAF  +923139292880


 https://electronics-tricks.blogspot.com



Youtube Channel:


 https://www.youtube.com/user/imran03452164785/videos?view_as=subscriber



Facebook Page:


 https://www.facebook.com/profile.php?id=100044482969994