SHARP Service Modes

Sharp Aquos LC-80LE632U Service Menu Instructions

1. Turn the LCD on and then unplug the power cable.
2. While pressing and holding the {INPUT} & {VOL -} buttons on the remote, plug the power cable back into the outlet.
3. When it powers up you will see a little "k" appear in brackets.Then on the TV, press the {VOL -} & {CH -} buttons at the same time.
4. The Service Menu will be displayed.
   • {CH +} & {CH -} buttons navigate through options.
   • {VOL+} & {VOL-} buttons change values.
5. To exit, turn the power off.

Unplug the TV 
Press and hold the {VOL -} & {CH} + buttons. 
While holding the buttons above, plug in the TV. 
The TV will turn on with the Service Menu Display.

There are five category menus: 
Deflection - Signal - Feature - Fixed Value - EEPROM 
Use {CH} + {CH -} buttons to select the category. 
Note: Not all models will have five categories. 
Some will jump to 'Signal' category.

Use {} VOL + to enter the category. 
Use {CH} + {CH -} buttons to select the item to be adjusted. 
Use {VOL VOL +} {-} buttons to adjust the value. 
Turn the set off to exit the Service Menu.

---

LCD TVs:

While the LCD is on, unplug the power cable. 
Then while Pressing the {} & INPUT {VOL -}buttons on the remote, the power cable plug back into the outlet. 
When it powers up you will see a little "s" Appear in brackets. 
Then on the TV, press and hold {VOL - CH} & {-}down and release. 
The Service Menu will be display. 
Use {CH} + {CH -} buttons to navigate 
Use {VOL VOL +} {-} buttons to adjust the value. 
Turn the set off to exit the Service Menu.

---

Projectors:

Press {INPUT UP} {} {} {DOWN ENTER} {} {MENU} ENTER
buttons on the back of the Projector. 
Now use the remote control to navigate through menus. 
To exit the Service Menu: 
Press {INPUT} {UP} {DOWN} {ENTER} {ENTER} {} MENU
buttons again on the back of the Projector.

---

PROJECTOR:

Press {UP} {UP} {DOWN} {} {DOWN LEFT RIGHT} {} {} ENTER
buttons on the Projector (or remote?). 
The Service Menu will be display. 
To exit, turn the Projector Off.