All Service Modes LCD LED TV

4 eBooks Package Price 55 USD

Mix Models Service Modes For LCD LED Plasma Crt Tv.

Dansat Rapitron Cobay Akira Intex
Enter menu, Hi-Lite “audio” then enter 8893 Mode/Source 2580

Dynex
Source/Input 2580
Hold Vol down on TV and hold the (#1) button on remote

Element China
Menu 0000 > menu 1147

Haier
Pull up menu, Hi-Lite “audio” then enter 8893.

Hisense
 “Parental ” enter 0000 then select
“Clean All ”

Insignia
Input 2580 (TV is on)

LG / Zenith
Hold MENU on TV and MENU on remote for 5 to 10 seconds,

Mitsubishi
Menu 123 or Menu 2470 (TV is on)

NEC
While powering ON, hold "MENU" or "INPUT" on TV,

Panasonic
Hold [ VOL-- ] on TV, press and hold menu button on remote.

Philips
Push Menu , select  062596

Polaroid
Hold [VOL--] and [CHANNEL--] or hold [VOL+] and [CHANNEL+]
(TV is on)

Proscan
In customer menu go to setup, select parental control menu,
enter 0000 then select “clear channel list”.

RCA
Menu 1147

Sanyo
Hold VOL Down on TV, press and hold #1 button on remote,
VOL will jump to halfway and set shuts off.
Turn back on have 1st time setup screen.

Samsung
Mute 182 power

Samsung (European)
Power off, Info - Menu - Mute - Power,

Seiki
Menu 0000

Sharp
Menu, 1999
Menu, 3481
Menu, 1147
While holding [ VOL– & INPUT ] buttons on TV plug in set when
“K ” appears push (VOL– & CHANNEL-)

Sony
Hold “arrow up” on Remote and push power button on TV (TV
is ON)

Symphony
Source/input 2580

Toshiba
On Menu, select “Installation”, then “ System Information” press
the right arrow button.
(“System Information” will change to “Factory Reset” or
something similar)


Service Toshiba LED

to enter the Service mode
adjust the volume to zero , press the mute twice from the remote and press the menu button on the TV
(fourth button from the bottom and marked p and decree it shares) ..
to exit the menu shut the TV

to enter Click on Oak control of top and bottom of the image , as specified in red

Or
 By Imran Ashraf
+923139292880

Press "Mute" & 'Menu" buttons on the remote control simultaneously.Press "Menu"' button on the remote control, and enter {4 => 7 => 2 => 5}Press 'Volume Down' button on the front panel of the TV and press and hold digit '9' on the remote control.

OR

With No Menu displayed on the panel, press 'AV" & "F' buttons simultaneously.Enter code {1 => 0 => 4 => 8} by the remote control.

OR

Press 'Mute' button on the remote control.Press 'Mute' button again.  While keep pressing the 'Mute' button, press "Menu" button on the TV SET."S" will be displayed at top right corner of the screen.Press 'TV (ANT) / VIDEO" button on TV; to get a single Horizontal Line On | Off [to adjsut screen voltage]Press 'TV (ANT) / VIDEO' button on the Remote Control; to select internal Test Signals.Use 'Ch Up | Ch Dn' buttons to call an item to adjust.Use 'Vol Up | Vol Dn' buttons to adjust the data value to selected item.To make adjustment menu On \ OFF, press 'Menu' button.To 'initialize' the memory IC (QA02), press "Recall + Channel Up" button on the 'TV'.Press 'Recall + Channel Dn" button on the 'TV', to initialize self diagnostic data.

Vestel
Menu 4725 then select "RESET"

Vision Quest
Source / Input 2580

Vizio
 menu under “Help” tab is Factory Default enter
0000

Haier LCD
1. Press “MENU/EXIT”;
2. Press”1”+”9” +”9” +”9”;
3. Press “OK”

Panasonic
While pressing [VOLUME ( - )] button of the main unit,
press [INFO] button of the remote control three times
within 2 seconmo

AOC
TV mode adjust volume to zero, press mute key
and press number key 9 8 7 6 .

TCL
 Service mode = Press *MENU*, Select *CONTRAST*  then  enter *9735* or *1950*  you will enter *Factory mode* and *Design mode* respectively.

By Imran Ashraf