How to install software

How to Install

1. allupgrade_msd338_4G_ref35.bin renamed to allupgrade_msd338_4G_sos.bin 
2. Inserted the USB flash drive in USB1 (it is already working) (By the way, for all operations with the USB flash drive it is necessary to wait for the indicator of the watch on the gas) 
3. Power is supplied to the TV 
4. TV has lifted the flash drive and on a blue background issued Upgarding software progress ran up to 45% quickly after 45 to 100 slower, but reached the end of 
5. TV Issued the message Software Upgrade complete and blinked rapidly the red / blue red LED 
6. Pulled the USB flash drive 
7. Turned off the TV from the network. 
8. Turned on the TV - the red light of the watch was 
on. 9. I pressed the button on. on the side panel 
10. There was an inscription Elenberg, but not red and a purple (I understand the beat of the matrix does not match)
11. A little patience and ... the long-awaited change of the image WISDOM SHARE inscription and the animation is quite long then the initial setup menu 
12 I connected the mouse and the keyboard 
13. I pressed the TV menu buttons - got into the settings menu 
14. I immediately typed 1147 on the keyboard - I got to the service menu 
15. In the service menu chose Panel Setting (8-point) 
16. In Panel Setting (10-point) LVDS Color Depth set 6-bit instead of 8-bit (arrow keys) = the image was corrected 
17. Left the menu esc 
18. passed the initial setup. 
19. It seems everything is OK. Now only tests and pick up the remote.